中文
- 中文
- English
- français
- Deutsch
- русский
- italiano
- español
- português
- 日本語
- 한국의

400G OSFP DR4 SM MPO12 Optical Transceiver IB

Features

Form Factor: Hot-pluggable OSFP form factor
Data Rate: Aggregate data rate of 425 Gb/s and Breakout data rate of 106.25 Gb/s
Optical Interface: Compliant to 400GBASE-DR4 and 4x100GBASE-DR
Transmitter: EML 1310nm transmitter
Electrical Interface: Compliant to 400GAUI-4 and 4x100GAUI-1
Receiver: PIN and TIA array on the receiver side
Management Interface: I2C management interface
Reach: Up to 500m over MPO-12/APC single mode fiber
Power consumption: 9 W max
Operating case temperature: 0 ~ 70 ℃
Power Supply: Single 3.3V power supply

Compliance

Form Factor: OSFP MSA
Optical: IEEE802.3bs Electrical: IEEE802.3ck Firmware: CMIS
Environment: RoHS
Stability: GR-468-CORE

Applications

400Gb/s Ethernet
Data Center
InfiniBand

现在查询下载

类别

热门产品

产品详细信息

400G OSFP DR4 Specification

NVIDIA single port transceiver
400G, NDR, OSFP, MPO12 APC,1310nm SMF, up to 100m, flat top.

OSFP 400G DR4

Functional Block Diagram

OSFP 400G DR4

General Description

The 400G OSFP DR4 are high performance, cost effective transceivers designed for utilization in 400 Gigabit Ethernet links over 500 meters of singe mode fiber. On transmitter side, the module converts four channels of 53.125 GBaud (PAM4) electrical data to four channels of parallel optical signals with data rate of 53.125 GBaud (PAM4). At receiver side, the module converts four channels of parallel optical signals with data rate of 53.125 GBaud (PAM4) into four channels of 53.125 GBaud (PAM4) electrical output data.

The product is designed according to the OSFP MSA. It is designed to meet the harshest external operating conditions including temperature, humidity, and EMI interference.

Absolute Maximum Ratings

Parameter	Symbol	Min	Typical	Max	Unit
Storage Temperature	Ts	-40		85	°C
Storage Relative Humidity (non-condensation)	RH	5		95	%
Supply Voltage	Vcc	-0.5		3.6	V
Supply Voltage	PIN			5.0	dBm

Recommended Operating Conditions

Parameter	Symbol	Min	Typical	Max	Unit
Operating Case Temperature	TC	0		70	°C
Signaling Rate, each lane			53.125		GBd
Data Rate Accuracy		-100		100	ppm
Power Supply Voltage	Vcc	-3.135	3.3	3.465	V
Pre-FEC Bit Error Ratio				2.4E-4
Transmission Distance				500	m

Module input characteristics

Parameter	Test Point	Min	Typical		Max	Unit
Signaling rate, each lane	TP1	53.125 ± 100 ppm				GBd
Differential pk-pk voltage tolerance	TP1a	750				mV
Peak-to-peak AC common-mode voltage tolerance	TP1a	25				mV
Differential-mode to common-mode return loss, RLcd	TP1	Equation (120G–2)				dB
Effective return loss, ERL	TP1	8.5				dB
Differential termination mismatch	TP1				10	%
Module stressed input tolerance	TP1a	See 120G.3.4.3				-
Single-ended voltage tolerance range	TP1a	–0.4			3.3	V
DC common-mode voltage tolerance	TP1	-0.35			2.85	V
Module stressed input tolerance test :
Pattern generator transition time	TP1a			9		ps
Applied peak-peak sinusoidal jitter	TP1a			Table 162-16
Eye height	TP1a			10		mV
Vertical eye closure, VEC	TP1a	12			12.5	dB
Crosstalk differential peak-to-peak voltage	TP4			845		mV
Crosstalk transition time	TP4			8.5		ps

Module output characteristics at TP4

Parameter	Test Point	Min	Typical	Max	Unit
Signaling rate, each lane	TP4	53.125 ± 100 ppm			GBd
Peak-to-peak AC common-mode voltage tolerance	TP4			25	mV
Differential peak-to-peak output voltage Short mode Long mode	TP4			600 845	mV
Eye height	TP4	15			mV
Vertical eye closure, VEC	TP4			12	dB
Common-mode to differential-mode return loss, RLdc	TP4	Equation (120G–1)			dB
Effective return loss, ERL	TP4	8.5			dB
Differential termination mismatch	TP4			10	%
Transition time	TP4	8.5			ps
DC common-mode voltage tolerance	TP4	-0.35		2.85	V

Digital Diagnostic Monitor Accuracy

The following characteristics are defined over recommended operating conditions.

Parameter	Accuracy	Unit
Internally Measured Transceiver Temperature	+/-3	℃
Internally Measured Transceiver Supply Voltage	+/-3	%
Measured Tx Bias Current	+/-10	%
Measured Tx Output Power	+/-3	dB
Measured Rx Received Average Optical Power	+/-3	dB

Pin Assignment and Description

OSFP 400G DR4

Package Dimensions

Package dimensions in mm are specified in OSFP OSFP MSA.

OSFP 400G DR4

Ordering Information

Part Number

Temperature

Range

Distance

Fiber Type

E/O

O/E

Media Connector

R12OSFP-400G-DR4

0 to 70℃

500m

SMF

EML

1310nm

MPO12

相关产品

400G QSFP28-DD FR4 CWDM4 2km LC Optical Transceiver

400G QSFP-DD FR4 optical transceiver module, support 400Gb/s and up to 2 km transmission on SM fiber, it works in high-speed IDC connection solutions.

400G QSFP-DD DR4 PAM4 1310nm 500M MPO Optical Transceiver

400G QSFP-DD DR4 optical transceiver module, support 400Gb/s and up to 500m transmission on SM fiber, it works in high-speed IDC connection solutions.

400G CFP2 DCO Optical Transceiver Module

400G CFP2 optical transceiver module Used on the system's motherboard Up to2000 km in MAN DWDM application

400G OSFP SR4 MM MPO12 Optical Transceiver IB

Features OSFP Serial Optical Interface 4x100G PAM4 retimed 400GAUI-4 electrical interface Active Optical cable 4 channel VCSEL arrays and 4 channels PIN photo detector arrays Maximum link length of 60m on OM3 or 100m on OM4 OSFP MSA Compliant Hot Pluggable OSFP form factor Compliant to OSFP Module Specification Rev 5.0 Compliant with CMIS 5.2 Support Protocol Compliant with IEEE 802.3db Compliant to IEEE 802.3ck Low Power Consumption Less than 8W in temperature range of 0 to 70℃ Applications 400GBASE-SR4 400G Ethernet Data center

400G QSFP-DD DR4 SM MPO12 Optical Transceiver

Features QSFP-DD Serial Optical Interface 8x50G PAM4 retimed 400GAUI-8 electrical interface MPO-12 connector with 8° angled end-face Up to 500m on SMF with FEC QSFP-DD MSA Compliant Hot Pluggable QSFP-DD form factor Compliant with CMIS5.2 Support Protocol IEE802.3.bs 400GBASE-DR4 Specification compliant Low Power Consumption Less than 10.5W in temperature range of 0 to 70℃ Applications 400Gb/s Ethernet Data Center InfiniBand interconnects

400G QSFP-DD FR4 2KM Optical Transceiver

Applications 400G BASE-FR4 Ethernet Data Center Interconnect InfiniBand Interconnect Enterprise Networking Features Compliant to QSFP-DD MSA 4 CWDM lanes MUX/DEMUX design 100G Lambda MSA 400G-FR4 Specification compliant Maximum power consumption 10W

400G QSFP-DD EDR4 SM MPO12 2km Optical Transceiver

Features IEEE 802.3bs Specification compliant QSFP-DD MSA compliant 4x106.25 Gbps PAM4 optical interface 8x53.125 Gbps PAM4 electrical interface I2C interface with integrated DDM Up to 2km transmission distance on single mode fiber (SMF) with FEC up ply voltage: 3.3 V Maximum power consumption: 12 W MTP/MPO-12 connector Operating case temperature: 0 to 70 °C RoHS compliant Applications 400G Ethernet Datacenter enterprise networking

4光16电以太网千兆工业级交换机 FW1016GS-4F

16*10/100/1000M自适应RJ45端口+4*千兆SFP端口（上行） FW1016GS-4F是一款工业全千兆管理型以太网交换机,提供16个千兆RJ45端口，4个千兆光口。EMC工业4级的防护性能；波纹式高强度铝型材外壳、IP40等级、低功耗设计、抗震的导轨安装，-40℃-75℃的工作温度，可工作于恶劣环境。

联系我们